Ventilated facades
Porcelain stoneware, composite panels, and fiber cement on a subframe with an air gap and properly resolved joints.
DurabilityMoisture protectionAlmaty climate
Almaty and region
Facade Finishing in Almaty
Facade systems delivered with correct installation technology, quality control, and an engineering approach to long-term durability.
All major facade system types
Installation quality control
Workmanship warranty
Engineering-based approach
Material detail
15+ facade types
Facade solutions
What facade systems Bereke Group delivers
From classic plaster systems to modern ventilated facades, we select the right solution for the architecture, Almaty climate, and target budget of the project.
Plaster systems
Decorative plaster over insulation with reinforcement and correct execution of the full facade build-up.
Monolithic lookMultiple texturesAccessibility
Porcelain stoneware
Large-format porcelain stoneware on a ventilated facade substructure for a durable, premium exterior skin.
Premium feelResistanceLow maintenance
Wood cladding
Planken, thermally modified wood, and wood-look composite panels for a warmer architectural expression.
Natural feelWarmthTexture
Combined facades
A mix of materials for stronger architectural expression, zoning, and a more tailored facade composition.
ExpressionZoningIdentity
Contemporary systems
Metal cassettes, HPL, and fiber cement for minimalist houses and modern commercial formats.
Contemporary lookGeometryTech character
What is included in the facade finishing service
A full cycle: from inspection and material selection to installation, quality control, and handover with warranty coverage.
Inspection and analysis
Site visit, measurements, and assessment of wall condition and geometry before facade works begin.
Material selection
We recommend the right facade system for the house style, climate, budget, and maintenance requirements.
Calculation and estimate
A detailed calculation of materials, works, key nodes, and the total project budget.
Base preparation
Leveling, reinforcement, and waterproofing of the substrate where the actual building condition requires it.
Facade installation
Installation of the subframe, insulation, and cladding according to the selected technology and resolved details.
Quality control
We check geometry, fixings, junctions, and workmanship quality at each key stage.
Final finishing
Reveals, junctions, flashings, and moisture protection are completed to the final handover condition.
Work handover
Acceptance, warranty commitments, and recommendations for future facade care and maintenance.
Integrated approach
We take responsibility for the full process, from measurements to final handover. The client receives a finished facade with warranty on materials and workmanship, without coordinating multiple contractors.
Material choice
How to choose a facade material
There is no universally best material. There is the material that best fits the architecture, budget, climate, and your expectations for maintenance.
Plaster
A classic solution
Best fit when:
Budget matters, but quality still matters too
You want a monolithic surface without joints
The house follows a classic or Mediterranean style
A specific final paint color is important
What to consider:
It needs periodic coating renewal and is more vulnerable to mechanical damage than harder facade systems.
Service life:15-20 years
Not sure what fits your house best? We visit the site, assess the conditions, and recommend the optimal solution based on the architecture, climate, and budget.
Important to understand
Why a facade should not be chosen from the picture alone
A facade is not just a decorative skin. It is a technical system that protects the house from moisture, temperature swings, and mechanical impact.
Visually similar facades can last 5 or 50 years depending on how the base is prepared, the details are resolved, the material is selected, and the installation is executed.
Compatibility with the base
The material does not hold on the wall
Correct preparation and fixing method
Moisture protection
Wet walls and breakdown over time
Vent gap and waterproofed junctions
Facade ventilation
Condensation inside the assembly
A properly designed ventilated cavity
Geometry and installation
Crooked joints and visible defects
Geometry and detail control during installation
Bereke Group treats the facade as a system
We do not simply install a material. We resolve the details, select compatible solutions, control geometry, and protect the envelope against Almaty's climate. The result is a facade designed to last for decades.
Why Bereke
Why Bereke Group for facade works
We deliver facades with an understanding of structure, climate, and long-term performance, not just the visual effect in the render.
Engineering-first approach
We treat the facade as a technical system, not only as a decorative outer layer of the building.
Selection for the house and climate
We account for the architecture, Almaty climate, and future maintenance requirements of the facade.
Installation control
Each stage is checked, from substrate preparation to junctions and final geometry.
Correct technology
Details, ventilation gaps, and fixings follow the manufacturer system and the conditions of the actual project.
Clear responsibility
We fix obligations on materials and workmanship so the client is not left with fragmented responsibility.
Long-term result
The target is a facade that lasts for decades without early defects or expensive rework.
Completed facades
Real projects with details on materials, installation process, and the finished result.
380 m²
Private house in a contemporary style
A combination of porcelain stoneware and plaster
4 weeks
Challenge: Complex facade geometry with installation next to panoramic glazing.
240 m²
Country house renovation
Ventilated facade with wood panels
3 weeks
Challenge: Installing a new facade system over an existing base with corrected detail nodes.
420 m²
Minimalist architecture
Fiber cement panels
5 weeks
Challenge: High precision requirements for joints, geometry, and clean junction execution.
Process
How facade work is delivered
A clear workflow with transparent stages and control points.
Step 1 · 1 day
Site review and measurement
We visit the site, measure the facade areas, assess wall conditions, and document geometry constraints.
Deliverable:
A clear understanding of scope and site conditions
Installation technology and quality control
Every stage is checked, from substrate preparation to final junction details.
Substrate preparation and leveling
Subframe installation for ventilated facades
Insulation installation where required
Material fixing with geometry control
Detail and junction execution
Moisture protection at critical connections
Ventilation gap and clearance checks
Final facade inspection and handover
Warranties and facade durability
Documented commitments and clear responsibility for workmanship and materials.
Workmanship warranty
From 3 years
Installation quality, detail execution, and fixings are documented in the contract.
Material warranty
From the manufacturer
Material durability is confirmed by supplier documentation and product specs.
Responsibility
Fixed
Scope, timeline, and quality obligations are defined and documented upfront.
Cost
What facade work pricing depends on
The main pricing factors behind the final facade budget.
Facade material
Plaster, porcelain stoneware, fiber cement, or wood define the base system cost.
Area and geometry
The total facade area, number of floors, and house geometry affect pricing.
Height and access
Scaffolding, lifts, and site logistics directly impact both budget and schedule.
Substrate preparation
Leveling, reinforcement, and corrections to existing walls are calculated separately.
Typical pricing range
Facade cladding in Almaty typically starts from around 8,000 KZT per m², depending on the material, wall condition, and detail complexity. After a site visit, we prepare a detailed estimate.
Frequently asked questions
Answers to the main questions about facade systems, installation, and timelines.
There is no single universal best material. Plaster gives a monolithic look with a more accessible budget, porcelain stoneware offers maximum durability, wood creates a warm natural character, and fiber cement works well in contemporary architecture. The right choice depends on style, budget, and maintenance expectations.
The final price depends on the selected system and the full scope of work. Material, subframe, insulation, building height, facade geometry, and substrate preparation all affect the budget. We provide an exact estimate after the site review and measurement.
Service life depends on the selected system: plaster solutions typically last 15-20 years, porcelain stoneware facades can last 50+ years, and quality wood solutions can perform for 20-30 years with proper maintenance. Longevity depends on both material quality and installation quality.
Yes, but not every system is equally suitable for winter work. Ventilated facades can usually be installed year-round, while wet processes and adhesive systems require proper temperature conditions. The answer depends on the selected technology.
That depends on the wall construction and the building's current thermal performance. In many cases, insulation under the facade reduces heat loss, protects the wall, and improves comfort. We recommend the right solution after reviewing the existing structure.
For a typical private house, facade work usually takes 2 to 6 weeks. The schedule depends on area, height, weather, the selected system, and the amount of preparation work.
Related services
Routes that most often go together with facade work.
Get a facade estimate
Let's review the material and calculate your facade budget
We visit the site, assess the conditions, recommend the right facade system, and prepare a detailed estimate.
Facade estimate
An accurate budget for your property
Material selection
We help choose the right system for style and budget
Send photos
You can share house photos and references
Site visit
Right system for the house
Detailed estimate
Workmanship warranty